Skip to main content

Fattie is Done!

I got the bike back from the shop on Thursday.  They had to break the head of the pinch bolt to remove the crank arm.  This bolt was way over torqued and Greg at The Stable thought the bolts were pretty soft and cheap.  So he replaced the bolt that was left and I will be running it for now with only one bolt.  Should be ok and at some point the crank will be upgraded.  So I stripped the bike down the rest of the way and started to build it back up.  I am glad I tore it down as it needed grease in the headset and I also greased all the bolts when I put it back together.
 
 
The Samox crank that came on the bike does not appear to be bad.  The chainrings on it were very heavy.  I changed them out and put on a 22 tooth small ring that I had, 36 tooth Blackspire and then added a bash guard.  I may remove the bash guard and add some of the tabs to cleanup the look.  The bike went back together smoothly.  I did decide to put Avid BB7 disc brakes.  I feel that mechanicals will be better in the cold weather this bike will be used in.  JJ's bike will get the hydraulic brakes that came on the Fat Bike.
 
 

Completed Bike!
 
It took me around 2 and a half hours to put together.  No real issues.  I will use clipless pedals on it for the summer and racing.  Will get a set of flat pedals that will match the color for real cold weather riding.  I also added my Garmin mount after the photos were taken.  So last thing was to weigh the bike, 36 pounds and 11 ounces. These pedals are heavy.  The brakes also added some weight as well as the grips.  I am listing the specs below.
 
FrameALLOY 6061 FRAME, W/DISC MOUNT ONLY, TIG WELD, 17 inch
Fork26" RIGID FORK, ALLOY STEM, 1-1/8" THREADLESS, ALLOY BLADE ?34.9mmx2.0 T TAPER ?28mmx200L, W/O PIVOT, W/DISC MOUNT ONLY
CranksetSAMOX 1/2"x11/128"x22T x36T, bash guard, ALLOY CRANK 175mm WITH BCD104 4 ARM, EB2401 BB SET FOR 9-SP
Bottom BracketBall Bearing Cartridge BB
PedalsFlat
Front DerailleurShimano FRONT DERAILLEUR, FD-M660-E, SLX, E-TYPE, TOP SWING, DUAL-PULL, CS ANGLE: 66-69, FOR 44T, KFDM660E6
Rear DerailleurSram X9, 9-SPEED
ShiftersSram XO Grip Shift
Cassette/FreewheelSram 9 speed  11-13-15-17-20-23-26-30-34T
Chain120 STEEL, 1/2"x 11/128"x120L
HubsALLOY DISC HUB, 14Gx32H, M9x135x145, W/QR IN BLACK, BALL BEARING, FREEHUB 9/10SP(ALLOY SHIMANO CASSETTE BODY).14/32 M10*135*145MM CR-MO AXLE,FINISH: ANODIZED BLACK,BALL BEARING
RIM STRIP 1 26", NYLON, WIDTH: 95mm, / RIM STRIP 1 26", NYLON, WIDTH: 75mm, NOTE: These are Coming with BLACK headset spacers, clamp, rim strips
SpokesSTAINLESS SPOKE IN ED BLACK, W/12mm BRASS NIPPLE
RimsRIM FRT 1 ALLOY RIM, 26"x3.0-4 1/4", 14Gx32H, F/V, W/BIG HOLE(28mm), FINISH: ANODIZED BLACK,
RIM RR 1 ALLOY RIM, 26"x3.0-4 1/4", 14Gx32H, F/V, W/BIG HOLE(28mm), 11.5mm, FINISH: ANODIZED BLACK
NOTE: These are Coming with BLACK headset spacers, clamp, rim strips
Tires/TubesV-Rubber 26x4.00, VRB321, WIRE BEAD, BK 72TPI
BrakesAvid BB7, 180mm Front, 160mm Rear
Brake LeversAvid Speed Dial SL
HeadsetFSA NO.10 STEEL 1-1/8"SEMI-INTEGRATED,CAGED BEARING
HandlebarForte Team, 31.8 clamp, 720mm width
StemBontrager Race Lite 90mm
Tape/GripErgon GP1 for Grip Shift
SaddleBontrager Race
Seat PostSette Edge, 30.9, 400mm
Seat Post ClampALLOY SEAT CLAMP, DIA: 34.9mm
NOTE: These are Coming with BLACK headset spacers, clamp, rim strips
Sizes17"
ColorsGreen



Comments

Popular posts from this blog

Summer Vacation: Day 10, Heading Home.

Sunday would be a long day of travel as we would make the trek home in one day.  Still shorter than driving from Marquette. We had breakfast and started to pack up.  I had put the bikes on the van Saturday evening while the grill was heating up and loaded a few things up.  We managed to get on the around just a few minutes after 12:00pm.   Michelle would take the first leg of the drive at the wheel of the van and I would rest.  We made a stop at a rest area in Manistique and I took a few photos. A lighthouse for Michelle.  A mouse in a tuxedo! We got back on the road and stopped at another rest area.   Very cool! Brendan made a friend. The were not to bad. Our next stop would be St. Ignace.  We wanted to eat at Clyde's Drive In.  However, after arriving the place was packed.  So we went to B.C. Pizza again.  After lunch we made our way to Castle Rock as we were not able to climb it on o...

Mother's Day Part II

On Sunday we celebrated Mother's Day at Church followed by a buffet at the Whistle Stop in Clio.  It was a very good meal and fun for all.   The Bauer's     The Garcia's   The Cody's minus Tyler   Then we celebrated at our house with Michelle's family in the evening with another big feast.    Help Yourselves!   A good time was had by all and one of the best Mother's Day celebrations yet.  Happy Mother's Day, we love you all! 

End of Summer

The Best Time to Bike! On Saturday I traveled with Raymond to the Bear Claw Epic.  This was the second annual race and the second time up there for Raymond and I.  We got there with plenty of time to spare and got ready to go. Farley ready to go. I registered for Beginner Fat Bike or at least I thought so?  I felt pretty good and knowing that I only had one lap to do I went all out.  I passed several riders through the race and felt I did pretty good.  This course has a lot of climbing and rewards you with some nice downhills. After I finished my race I put on a fresh shirt and went out on the course with the camera and my new lens.  I took over 400 pictures and headed back to the start finish after Raymond finished his race. Raymond on his second lap. And the final climb. The beginner awards were going on and they announced my name as first place for Beginner Men 50-59.  I was surprised, but did not protest.  Aft...